TM2580C

TM2580C Membrane Press  Machine

1.Machine body made of  6 columns steel plate bearing uniform force, good stability.

2. Running of working table takes chains companied frequency transformer; starting in low speed, running high and low speed to end, which prevent the work piece moving.

3. “DELTA” PLC controller used for operation system, automatically convenient to control.

4. Made in China with Germany technology vacuum pump, good working, and easy maintenance.

5. Take “Schneider”, “Wedermuller” electric device, and “DELTA” DVP-32ESO

6. With theory of plug-in mounting, Taiwan hydraulic system run promptly, and seldom break down,(use 5 s to load hydraulic pressure)

Samples:

Technical Specifications ：

Exterior size ： 10030mm×2230 mm×2150mm
Working plate size ： 2580mm×1270mm（inner size）,maxi work piece size:2440x1150mm
Maximum height of the work piece: 50mm（including bottom plate.If you have special higher work piece,please indicate in advance,so that choosing a heightening frame in 25mm）

Rating working pressure ：positive pressure≤0.5Mpa  negative pressure≥-0.095Mpa
General Power :about 48Kw(Upper heat tranfer oil heating system:36kw,vacuum pump:2.2kw,hydraulic pressure system:5.5kw,circulating heat conduction oil pump:3kw,travel motor:1.1kwX2(two tables)=2.2kw)
Actual power consumption ：about12-14Kw
Weight ：10.6T

Payment: 30% deposit, balance 70% before shipment (in advance 2 weeks before shipment).

Delivery time: 30days after receiving 30% deposit.

Packing material: EPE film+ preservative film

Package size: 3.25x2.25x2.05m; 2.46x1.25x1.9m (not including optional devices)

                            main machine package                               accessories package