TM2680C

Note: The appearance and specification may change with improvement; we will not give extra notice about such changes.

General Introduction:

This machine has the following functions:

Veneer Pressing Machine, which press veneer on Curved-surface door panel with double sides at one time, or single side ; Cold pressing machine and Hot pressing machine to press flat, as removing the working frame and clamps；.but the main function is covering veneer on two sides at one time, other functions are auxiliary.

 Samples:

Features:

1. The operation system uses “Delta” brand PLC from Taiwan with large man-machine and touching screen. The machine is easy to control and the technology is highly advanced. The automatic degree is very high.

“Delta” PLC controller

Operation panel

2. Vacuum pump is Chinese “ZD” V0063 which adopt German technology, same structure, but economical to maintain, low noise, high quality and stability.

“ZD” pump

3. The electrical equipments for control system adopt “Schneider” Contactor 0910,2510,”Weidmuller” and “Delta” Intermediate relay, other equipments use the domestic famous brand.

Electrical system

4. The key components of the hydraulic pressure system choose the Taiwanese system, motor and pump from “Compass” with plate plug-in principle features advanced structure which adopts the international advanced technology. Low malfunction rate, high flow and rapid pressure (it takes 5s to load pressure, then 15-20s by traditional overlying system), thus promoting production efficiency.

Hydraulic pressure system

5. This machine has 2 trays which are easy to pick and place work pieces, and they work by turns, thus efficiency promoted 60%.

Technical Specifications:

Exterior size: 3520 mm×3810 mm×2250mm

Working plate size: 2300 mm×1100mm (inner size)

Maximum height of the work piece: 40mm

Rating working pressure: Positive pressure≤0.5Mpa 

Negative pressure≥-0.095Mpa

General Power: 37.4kw

Actual power consumption: about 13kw

Total weight: 9.3T

Top temperature: 125℃

Payment: 30% deposit, balance 70% before shipment (in advance 2 weeks before shipment).

Delivery time: 25 days after receiving 30% deposit.

Packing material: EPE film+ preservative film

Package size: 3.65x1.6x2.2m

Package picture